● Dual-head printing FFF extruder, CFC extrusion and fiber cut-off device
● Heated build platform, fully enclosed print chamber
● Simple to use, low maintenance equipment
● Customized fiber routing for structural optimization
Supports third-party open-source consumables, effectively reducing the cost of use

Unique continuous fiber 3D printing technology based on co-extrusion, designed to produce idealized composite parts.

Printing space size: A4:297mmх210mmх140mm/A3:460mmх297mmх210mm
Type of technology: Fused Filament Film Stacking (FFF), Composite Continuous Fiber Coextrusion (CFC).
Print head: dual print head (FFF extruder, CFC extruder) and fiber cut-off device
Minimum layer thickness: 60μm
Extruder nozzle diameter: 0.4 mm
Printing speed, FFF: 10mm/sec - 80mm/sec
Print speed, CFC: 1mm/sec - 10mm/sec
Plastic wire diameter: 1.75 mm
Supported third party consumable types: Wire with processing temperature up to 270°.
Continuous fiber type: CCF-1.5k, CBF, and third-party fibers
Construction platform material: High temperature resistant glass

CFC PETG: Perfect adhesion to CCF, CBF and Clear PETG.

CFC PA: perfect adhesion to CCF, CBF and Smooth PA, high mechanical properties and stable print quality.

SMOОTH PA: high-strength engineering polymer for plastic housings, fillers, top (bottom) layers, supports or pure FFF parts, excellent surface finish, low moisture absorption

CLEAR PETG: easy to print, high layer-to-layer adhesion and low shrinkage, wide range of application scenarios. Temperature:-40°C to +70°C, higher impact resistance and flexibility

Wall mounted brackets

Mask fiber layup optimization can effectively reduce the amount of fiber used and maximize the efficiency of reinforcing fiber use.

Reinforcement solution: 30% resin; mask-2 weeks of fiber surround reinforcement
Fiber: CCF
Plastic: PETG