● Automatic calibration
● Material storage box temperature and humidity control
● 7*24 hours uninterrupted operation in the factory environment
● Equipped with Dr. Rexroth high-precision control system
● Upgradeable to 4 printheads
● Material flow and motion controller
● Maximum productivity in CFC mode: 60CC/H

Unique continuous fiber 3D printing based on coextrusion technology

Print size (X/Y/Z ): 600 mm / 420 mm / 300 mm
Plastic: PEI, PAEK (PEEK, PEKK), PSU, PPSU, PESU, etc.
Software: Anisoprint Aura
Fiber: Continuous Carbon Fiber, HT/LT, 1k and 3k
Printheads: 4 (max.)
Extruder temperature: 410°C (max)
Single Layer Degree: 50 (min)
Chamber Temperature: Chamber Temperature
FFF nozzle diameter: 0.4 mm - 1.2 mm
Material storage chamber temperature: 90°C
CFC nozzle diameter: 0.6 mm - 1 mm
Dimensions: 2700 mm / 1800 mm / 2300 mm
Reinforcement fiber thickness: 1k - 0.28 mm, 3k - 0.50 mm
Power supply: 380 VAC, 50/60 Hz, Current 40A
Filament Diameter: 1.75 mm , 2.85 mm (optional)

CFC PETG: Perfect adhesion to CCF, CBF and Clear PETG.
CFC PA: perfect adhesion to CCF, CBF and Smooth PA, high mechanical properties and stable print quality.
SMOОTH PA: high-strength engineering polymer for plastic housings, fillers, top (bottom) layers, supports or pure FFF parts, excellent surface finish, low moisture absorption
CLEAR PETG: easy to print, high layer-to-layer adhesion and low shrinkage, wide range of application scenarios. Temperature:-40°C to +70°C, higher impact resistance and flexibility
PEKK-SC: leading material in the PAEK series, excellent mechanical properties, high heat and chemical resistance, easier to print than PEEK
PEKK-A: excellent mechanical properties and heat resistance, excellent chemical resistance and oxidation resistance
PSU, PPSU, PESU: one of the highest performing plastics in the industry.
PEI: high flexural modulus, excellent fire performance, natural flame retardant (can be V0 or more)

connecting rod